High copper content provides long-term protection against severe bottom fouling Ultra-Kote hard antifouling paint is heavily loaded with cuprous oxide for maximum performance in severe foulingconditions. The modified epoxy formula results in a durable finish with excellent color stability. This durable finish stands up to abrasion and when needed, periodic scrubbing by a diver. Ultra-Kote is also low in VOCs, which minimizes itsimpact on the environment; and it dries quickly so you can paint and launch on the same day. Ultra-Kote is a great choice for fiberglass, steel, and wood boats in brackish or salt water. We offer Ultra-Kote in Red,Blue, Green and Black. Key features Durable finish stands up to abrasion Good choice for medium to high fouling areas Excellent color stability Low-VOC formula limits solvent emissions Suitable for use on power and sailboats in all waters Physical Data Vehicle type: Cuprous oxide Finish: Matte Available colors: Blue, Green, Red, Black Components: 1 Curing mechanism: Solvent release Solids by Volume: (Theoretical): 63% Coverage: 506sq. ft./gal. VOC: 327d grams/liter (as supplied) Active ingredients: 76.2% Cuprous Oxide Application Application Method: Brush, roller, airless, or conventional spray Number of coats recommended: 2 coats, 3 on bare wood (first coat thinned) Wet Film Thickness: 3.2 mils/coat Dry Film Thickness: 2 mils/coat Applicator: High-quality short nap roller (maximum 3/8” nap) Application temperature Min. /Max. Range: 10C/50F and maximum 35C/95F. Thinner: Special Thinner 216, Model 117598 , Brush-Ease 433, Model 203679 Drying Times*